CER 505 (C1TE) Tile Adhesive

Cement-based, slip-reduced, extended open time C1TE class tile and tile adhesive mortar.

You Can Reach Us By Phone

You Can Reach Us via WhatsApp

Used indoors on cement-based surfaces such as plaster and wall screed for the application of ceramic and tile coverings.

Mix a 25 kg bag with 6.00-6.50 liters of clean water, slowly adding water while mixing at low speed for 2-3 minutes until homogeneous.
Let rest for 5 minutes, then mix again for 1-2 minutes before use.

The surface must be dry, clean, and sound.
Cracks, weak, and damaged areas must be repaired at least 24 hours before application.
Application temperature and the following 24 hours must be between +5°C and +35°C.
Avoid application on frozen surfaces, under windy conditions, or if freezing is expected within 24 hours.

Packaging	25 kg Kraft Bag
Color	Gray
Shelf Life	12 months if stored unopened in dry, moisture-free conditions. Bags must be tightly sealed if unused. Protect from frost and sunlight.

4.00 – 6.00 Kg/m²

Product Structure	Cement-Based Powder
Color	Gray and White
Water Mixing Ratio	6.00-6.50 liters water / 25 kg
Consumption	4-6 kg/m²
Reference Standard	TS EN 12004:2017
Initial Tensile Adhesion Strength	≥ 0.5 N/mm²
Tensile Adhesion Strength After Water Immersion	≥ 0.5 N/mm²
Tensile Adhesion Strength After Heat Aging	≥ 0.5 N/mm²
Tensile Adhesion Strength After Freeze-Thaw Cycles	≥ 0.5 N/mm²
Open Time Tensile Adhesion Strength (After 20 Minutes)	≥ 0.5 N/mm²
Slip Resistance	≥ 0.5 N/mm²
Reaction to Fire Class	A1
Pot Life	2-3 Hours
Working Time	Maximum 20 Minutes
Walkable Time	24 Hours

Would You Like Us to Call You?

Our team will contact you as soon as possible to offer the most suitable solution for your needs.

PHONE

Your First Name

Your Last Name

Your Email Address

Your Phone Number

Privacy Policy i have read and agree to it.