CER 808 (C2TES2) Tile Bonding Mortar

Advantages

• Offers economical and easy application.
• Does not sag in vertical applications.
• Has long working time and high adhesion performance for large format coverings.

Application Areas

Used indoors and outdoors on cement-based surfaces such as plaster, wall screeds, and similar, for installing large-format ceramic, tile, porcelain, granite, and marble coverings; also suitable for pools and underfloor heating areas.

Application Features

• Mix a 25 kg bag with 6.00-6.50 liters of clean water, slowly adding the powder to the water while mixing at low speed for 2-3 minutes until homogeneous.
• Let rest for 5 minutes, then mix again for 1-2 minutes before use.

Warnings and Recommendations

• The surface must be dry, clean, and sound.
• Cracks, weak, and damaged areas must be repaired at least 24 hours before application.
• Application temperature and the following 24 hours must be between +5°C and +35°C.
• Avoid application on frozen surfaces, under windy conditions, or if freezing is expected within 24 hours.

Storage

Consumption

4.00 – 6.00 Kg/m²

Technical Specifications and Performance Values

The specified durations apply at 20°C surface and ambient temperature. Times extend at lower temperatures and shorten at higher temperatures. DryFiX is not responsible for application defects caused by improper use, or failure to comply with the recommended application conditions and instructions.